Turnover box mold friction and guiding parts must be processed, cannot use any manual work. Must use low melt index of HDPE material. To ensure that the cooling system to achieve the optimal effect. To make durable two hydraulic machine with machine automatic ejection, mould out of action can be more smoothly. For different types of mold, to adopt precision mold processing to ensure the accuracy of the mold running, otherwise the mould is impossible to have high speed operation performance. Casino turnover box mold with accelerator improve melt injection speed. Plastic turnover box mold design are also very important. Fruit turnover basket mould ejection way best design for mechanical out, so that when the mould cavity can finish top is out of action.

Thin-wall mould structure, also known as shell structure. Its thickness much smaller than other sizes (span) only 0.4 0.8 mm, so called thin wall. It beints to the spatial structure, within the main surface under axial pressure and bending moment is very small. Its force is more reasonable, strength of materials can be fully used. Shell is often used in large span roof structure, such as exhiintion hall, club, hangar, etc. Thin wall mold for the wall thickness, product is light, high yield, short turnaround, so very high demand for mould making, clamping structure more reasonable, the product of concentricity, can't eccentric, waterway design is reasonable, so as to reduce molding cycle.

Is the plastic tray, plastic tray is use thermoplastic plastics such as PE, PP, add some additives, improve performance by injection molding, blow molding process. As the production conditions, storage conditions, the requirement of increasing the process control, quality management, because the wooden pallets in health status and unable to overcome the limitations of standard production, plastic tray, and quickly occupied a place. Has been widely used in machinery, electronics, food, medicine, clothing, etc. Compared with the wooden tray, plastic tray, integral sex is good health and clean, easy to wash disinfection, have qualitative light, in use without stinging, acid and alkali resistant, no mildew etc, its service life is 5 to 7 times that of the wooden pallets. In addition, the plastic tray conform to the requirements of environmental protection, waste plate materials can be recycled. Although plastic pallet prices are relatively high, but the use of cost accounting is lower than the wooden pallets.

Mold fittings is referring to the mold industry, which is used in the proprietary of stamping die, plastic mould or FA automation equipment of the floorboard of the metal parts. Die parts include: blunt needle, punch, guide pin, guide sleeve, ejector, division tube, steel ball, no guide sleeve to oil, no oil skateboarding, guide pin components, etc.